IMEX Duraface Fixation Half-Pin
17020EX
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
17020
2.5 mm x 95 mm
IMEX Duraface Fixation Half-Pin - 2.5 mm x 95 mm
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
Product #:
17020
17332
3.2 mm x 100 mm
IMEX Duraface Fixation Half-Pin - 3.2 mm x 100 mm
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
Product #:
17332
1776L
3.5 mm x 150 mm
IMEX Duraface Fixation Half-Pin - 3.5 mm x 150 mm
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
Product #:
1776L
1733L
3.2 mm x 150 mm
IMEX Duraface Fixation Half-Pin - 3.2 mm x 150 mm
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
Product #:
1733L
1718L
4.0 mm x 150 mm
IMEX Duraface Fixation Half-Pin - 4.0 mm x 150 mm
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
Product #:
1718L
17532
4.8 mm x 150 mm
IMEX Duraface Fixation Half-Pin - 4.8 mm x 150 mm
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
Product #:
17532
1753L
4.8mm x 200 mm
IMEX Duraface Fixation Half-Pin - 4.8mm x 200 mm
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
Product #:
1753L
17764
3.5mm x 110 mm
IMEX Duraface Fixation Half-Pin - 3.5mm x 110 mm
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
Product #:
17764
17964
4.3 mm x 130 mm
IMEX Duraface Fixation Half-Pin - 4.3 mm x 130 mm
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
Product #:
17964
1796L
4.3 mm x 175 mm
IMEX Duraface Fixation Half-Pin - 4.3 mm x 175 mm
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
Product #:
1796L
17180
4.0 mm x 115 mm
IMEX Duraface Fixation Half-Pin - 4.0 mm x 115 mm
Duraface fixation half-pins are end-threaded, feature a TRO (tapered thread-run-out) junction, and a single trocar point. Predrilling is recommended.
Standard length pins are used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter. Part numbers ending with "L" indicate extended length pins.
Implant quality 316LVM, stainless steel
U.S. patent #8,282,676
Product #:
17180