Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable. Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length. Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength. Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
506.200
9.5mm x 200 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 506.200
506.100
9.5 mm x 100 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 506.100
506.150
9.5 mm x 150 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 506.150
506.250
9.5 mm x 250 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 506.250
506.300
9.5mm x 300 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 506.300
506.350
9.5 mm x 350 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 506.350
406.050
6.3 mm x 50 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 406.050
406.100
6.3 mm x 100 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 406.100
406.150
6.3 mm x 150 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 406.150
406.200
6.3 mm x 200 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 406.200
406.250
6.3 mm x 250 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 406.250
506.050
9.5 mm x 50 mm
Available in diameters of 6.3 mm for the small SK ESF clamp and 9.5 mm for the large SK ESF clamp in 50 mm length increments. Tremendous rod strength compared to traditional KE type rods. Carbon fiber rods offer near radiolucency to simplify radiographic imaging and are by far the most popular. Autoclavable.
Additional Product InformationCarbon fiber rods cannot be bent or contoured for transarticular use. If transarticular frames are needed consider a modified transarticular clamp. Carbon fiber rods cannot be cut with bolt cutters but must be cut with a fine tooth hack saw blade or dremel tool with abrasive disc. Place a moist towel over the saw and rod when cutting to contain any carbon dust created. Keep a variety of rod lengths on hand to avoid the need to cut to length.
Small SK Carbon Fiber Connecting Rods, 6.3 mm Diameter Available in lengths up to 250 mm. Compared to KE stainless steel rods, the small carbon fiber rod is five times stronger than a small KE rod and nearly as strong as a medium KE rod. Therefore, when utilizing 2.0 mm pins or small pins, carbon fiber has more than adequate strength.
Large SK Carbon Fiber Connecting Rods, 9.5 mm DiameterAvailable in lengths up to 350 mm. Tremendous rod strength compared to traditional KE type rods. The large 9.5 mm carbon fiber SK rods are approximately seven times stronger than medium KE stainless steel rods.
Product #: 506.050