The PAUL osteotomy saw guide has been designed to place the Ulna osteotomy at the correct position, in the correct angle and to prevent the Radius from being injured in the process. Size 8 + 9 as well as size 10 + 11 are combined in one saw guide. There is a saw guide for each side available. When using a K-wire for fixation a 0.062 inch or 1.6mm pin should be used. The size 8 and 9 caps have a 1.8mm drill hole and the size 10 and 11 caps have a 2.0mm drill hole. The maximum saw blade width is 0.7mm.
46.31.08
8/9 L
The PAUL osteotomy saw guide has been designed to place the Ulna osteotomy at the correct position, in the correct angle and to prevent the Radius from being injured in the process.
Size 8 + 9 as well as size 10 + 11 are combined in one saw guide. There is a saw guide for each side available.
When using a K-wire for fixation a 0.062 inch or 1.6mm pin should be used. The size 8 and 9 caps have a 1.8mm drill hole and the size 10 and 11 caps have a 2.0mm drill hole.
The maximum saw blade width is 0.7mm.
Product #: 46.31.08
46.32.08
8/9 R
The PAUL osteotomy saw guide has been designed to place the Ulna osteotomy at the correct position, in the correct angle and to prevent the Radius from being injured in the process.
Size 8 + 9 as well as size 10 + 11 are combined in one saw guide. There is a saw guide for each side available.
When using a K-wire for fixation a 0.062 inch or 1.6mm pin should be used. The size 8 and 9 caps have a 1.8mm drill hole and the size 10 and 11 caps have a 2.0mm drill hole.
The maximum saw blade width is 0.7mm.
Product #: 46.32.08
46.33.08
Cap 8
The PAUL osteotomy saw guide has been designed to place the Ulna osteotomy at the correct position, in the correct angle and to prevent the Radius from being injured in the process.
Size 8 + 9 as well as size 10 + 11 are combined in one saw guide. There is a saw guide for each side available.
When using a K-wire for fixation a 0.062 inch or 1.6mm pin should be used. The size 8 and 9 caps have a 1.8mm drill hole and the size 10 and 11 caps have a 2.0mm drill hole.
The maximum saw blade width is 0.7mm.
Product #: 46.33.08
46.33.09
Cap 9
The PAUL osteotomy saw guide has been designed to place the Ulna osteotomy at the correct position, in the correct angle and to prevent the Radius from being injured in the process.
Size 8 + 9 as well as size 10 + 11 are combined in one saw guide. There is a saw guide for each side available.
When using a K-wire for fixation a 0.062 inch or 1.6mm pin should be used. The size 8 and 9 caps have a 1.8mm drill hole and the size 10 and 11 caps have a 2.0mm drill hole.
The maximum saw blade width is 0.7mm.
Product #: 46.33.09
46.41.10
10/11 L
The PAUL osteotomy saw guide has been designed to place the Ulna osteotomy at the correct position, in the correct angle and to prevent the Radius from being injured in the process.
Size 8 + 9 as well as size 10 + 11 are combined in one saw guide. There is a saw guide for each side available.
When using a K-wire for fixation a 0.062 inch or 1.6mm pin should be used. The size 8 and 9 caps have a 1.8mm drill hole and the size 10 and 11 caps have a 2.0mm drill hole.
The maximum saw blade width is 0.7mm.
Product #: 46.41.10
46.42.10
10/11 R
The PAUL osteotomy saw guide has been designed to place the Ulna osteotomy at the correct position, in the correct angle and to prevent the Radius from being injured in the process.
Size 8 + 9 as well as size 10 + 11 are combined in one saw guide. There is a saw guide for each side available.
When using a K-wire for fixation a 0.062 inch or 1.6mm pin should be used. The size 8 and 9 caps have a 1.8mm drill hole and the size 10 and 11 caps have a 2.0mm drill hole.
The maximum saw blade width is 0.7mm.
Product #: 46.42.10
46.43.10
Cap 10
The PAUL osteotomy saw guide has been designed to place the Ulna osteotomy at the correct position, in the correct angle and to prevent the Radius from being injured in the process.
Size 8 + 9 as well as size 10 + 11 are combined in one saw guide. There is a saw guide for each side available.
When using a K-wire for fixation a 0.062 inch or 1.6mm pin should be used. The size 8 and 9 caps have a 1.8mm drill hole and the size 10 and 11 caps have a 2.0mm drill hole.
The maximum saw blade width is 0.7mm.
Product #: 46.43.10
46.43.11
Cap 11
The PAUL osteotomy saw guide has been designed to place the Ulna osteotomy at the correct position, in the correct angle and to prevent the Radius from being injured in the process.
Size 8 + 9 as well as size 10 + 11 are combined in one saw guide. There is a saw guide for each side available.
When using a K-wire for fixation a 0.062 inch or 1.6mm pin should be used. The size 8 and 9 caps have a 1.8mm drill hole and the size 10 and 11 caps have a 2.0mm drill hole.
The maximum saw blade width is 0.7mm.
Product #: 46.43.11