All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
KOA150S
15mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA150S
KOA170S
17mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA170S
KOA190S
19mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA190S
KOA060S
6mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA060S
KOA070S
7mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA070S
KOA080S
8mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA080S
KOA090S
9mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA090S
KOA100S
10mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA100S
KOA110S
11mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA110S
KOA120S
12mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA120S
KOA140S
14mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA140S
KOA160S
16mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA160S
KOA180S
18mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA180S
KOA200S
20mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA200S
KOA130S
13mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 1.5 mmThread Pitch: 0.5 mmDiameter of Core: 1.1mmDiameter of Head: 3.0mmStardrive Recess: T4Thread Hole: 1.1 mmGliding Hole: 1.5 mm
Product #: KOA130S