All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
KOB130
13mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB130
KOB320
32mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB320
KOB340
34mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB340
KOB360
36mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB360
KOB380
38mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB380
KOB400
40mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB400
KOB420
42mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB420
KOB440
44mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB440
KOB070
7mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB070
KOB090
9mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB090
KOB110
11mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB110
KOB100
10mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB100
KOB060
6mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB060
KOB080
8mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB080
KOB120
12mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB120
KOB160
16mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB160
KOB200
20mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB200
KOB220
22mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB220
KOB260
26mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB260
KOB280
28mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB280
KOB300
30mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmHex Recess Width: 1.5mmThread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB300