All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
KOB060S
6mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB060S
KOB080S
8mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB080S
KOB100S
10mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB100S
KOB120S
12mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB120S
KOB140S
14mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB140S
KOB160S
16mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB160S
KOB180S
18mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB180S
KOB200S
20mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB200S
KOB070S
7mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB070S
KOB090S
9mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB090S
KOB320S
32mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB320S
KOB130S
13mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB130S
KOB340S
34mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB340S
KOB360S
36mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB360S
KOB380S
38mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB380S
KOB400S
40mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB400S
KOB220S
22mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB220S
KOB240S
24mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB240S
KOB260S
26mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB260S
KOB280S
28mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB280S
KOB300S
30mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.0mmThread Pitch: 0.6mmDiameter of Core: 1.4mmDiameter of Head: 4.0mmStardrive Recess: T6Thread Hole: 1.5mmGliding Hole: 2.0mm
Product #: KOB300S