All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
KOD060
6mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD060
KOD080
8mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD080
KOD160
16mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD160
KOD280
28mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD280
KOD300
30mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD300
KOD320
32mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD320
KOD340
34mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD340
KOD360
36mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD360
KOD380
38mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD380
KOD400
40mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD400
KOD420
42mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD420
KOD440
44mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD440
KOD450
45mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD450
KOD460
46mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD460
KOD480
48mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD480
KOD500
50mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD500