All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
KOD060S
6mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD060S
KOD080S
8mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD080S
KOD100S
10mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD100S
KOD120S
12mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD120S
KOD140S
14mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD140S
KOD160S
16mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD160S
KOD180S
18mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD180S
KOD200S
20mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD200S
KOD220S
22mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD220S
KOD240S
24mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD240S
KOD260S
26mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD260S
KOD280S
28mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD280S
KOD300S
30mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD300S
KOD450S
45mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD450S
KOD320S
32mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD320S
KOD340S
34mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD340S
KOD360S
36mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD360S
KOD380S
38mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD380S
KOD400S
40mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD400S
KOD420S
42mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD420S
KOD440S
44mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD440S
KOD460S
46mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD460S
KOD480S
48mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD480S
KOD500S
50mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 2.7mmThread Pitch: 1.0mmDiameter of Core: 1.9mmDiameter of Head: 5.0mmStardrive Recess: T8Threaded Hole: 2.0mmGliding Hole: 2.7mm
Product #: KOD500S