All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
KOE160
16mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE160
KOE240
24mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE240
KOE260
26mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE260
KOE280
28mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE280
KOE580
58mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE580
KOE560
56mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE560
KOE100
10mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE100
KOE300
30mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE300
KOE320
32mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE320
KOE340
34mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE340
KOE360
36mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE360
KOE380
38mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE380
KOE400
40mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE400
KOE420
42mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE420
KOE440
44mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE440
KOE450
45mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE450
KOE460
46mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE460
KOE480
48mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE480
KOE500
50mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE500
KOE520
52mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE520
KOE540
54mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE540
KOE550
55mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE550
KOE600
60mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE600
KOE650
65mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE650
KOE700
70mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmHex Recess Width: 2.5 mmThreaded Hole: 2.5mmGliding Hole: 3.5mm
Product #: KOE700