All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
KOE520S
52mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE520S
KOE540S
54mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE540S
KOE560S
56mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE560S
KOE580S
58mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE580S
KOE600S
60mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE600S
KOE450S
45mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE450S
KOE100S
10mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE100S
KOE120S
12mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE120S
KOE140S
14mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE140S
KOE160S
16mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE160S
KOE180S
18mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE180S
KOE200S
20mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE200S
KOE220S
22mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE220S
KOE240S
24mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE240S
KOE260S
26mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE260S
KOE280S
28mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE280S
KOE320S
32mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE320S
KOE340S
34mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE340S
KOE360S
36mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE360S
KOE380S
38mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE380S
KOE400S
40mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE400S
KOE420S
42mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE420S
KOE440S
44mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE440S
KOE460S
46mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE460S
KOE480S
48mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE480S
KOE500S
50mm
All of the screws are self-tapping (except for 5.5mm screws) which means that tapping may only be required in very hard bone. Self-tapping screws should always protrude 2-3mm from the trans-cortex to allow full engagement of the thread with the cortical bone. This must be taken into account when using the depth gauge.Knight Benedikt???s range of stainless steel cortex screws includes screws with both a hex recess and a star drive recess. Hex screws are cheaper but the recess strips easier and a screwdriver sleeve is always recommended. Screws with a star drive recess on the other hand are very resistant to stripping.Diameter of Thread: 3.5mmThread Pitch: 1.25mmDiameter of Core: 2.4mmDiameter of Head: 6.0mmStardrive Recess: T15Threaded Hole: 2.5mmGliding Hole: 3.5mmCode Size
Product #: KOE500S