Triarc Syringe Labels
LABXXX
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
LAB019
Saline
Triarc Syringe Labels - Saline
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB019
LAB001
Plain
Triarc Syringe Labels - Plain
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB001
LAB031
Plastic Modular Dispenser 15mm
Triarc Syringe Labels - Plastic Modular Dispenser 15mm
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB031
LAB006
Alfaxalone mg/ml
Triarc Syringe Labels - Alfaxalone mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB006
LAB027
Medetomidine mg/ml
Triarc Syringe Labels - Medetomidine mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB027
LAB002
NSAID mg/ml
Triarc Syringe Labels - NSAID mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB002
LAB008
Propofol mg/ml
Triarc Syringe Labels - Propofol mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB008
LAB015
Local Anaesthetic mg/ml
Triarc Syringe Labels - Local Anaesthetic mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB015
LAB009
Ketamine mg/ml
Triarc Syringe Labels - Ketamine mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB009
LAB030
Methadone mg/ml
Triarc Syringe Labels - Methadone mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB030
LAB025
Reversal / Anti Orange
Triarc Syringe Labels - Reversal / Anti Orange
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB025
LAB003
Buprenorphine mg/ml
Triarc Syringe Labels - Buprenorphine mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB003
LAB033
Plastic Modular Dispenser 35mm
Triarc Syringe Labels - Plastic Modular Dispenser 35mm
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB033
LAB057
0.9% Saline
Triarc Syringe Labels - 0.9% Saline
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB057
LAB023
Medication added Drug/Amount/Added by
Triarc Syringe Labels - Medication added Drug/Amount/Added by
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB023
LAB056
Butorphanol mg/ml
Triarc Syringe Labels - Butorphanol mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB056
LAB020
Antibiotic
Triarc Syringe Labels - Antibiotic
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB020
LAB028
Date Opened Expires
Triarc Syringe Labels - Date Opened Expires
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB028
LAB014
Midazolam mg/ml
Triarc Syringe Labels - Midazolam mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB014
LAB037
Lignocaine
Triarc Syringe Labels - Lignocaine
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB037
LAB067
New Prescription Needed
Triarc Syringe Labels - New Prescription Needed
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB067
LAB055
Dexmedetomidine
Triarc Syringe Labels - Dexmedetomidine
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB055
LAB029
Paracetamol
Triarc Syringe Labels - Paracetamol
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB029
LAB068
Take With Or After Food
Triarc Syringe Labels - Take With Or After Food
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB068
LAB040
Metoclopramide
Triarc Syringe Labels - Metoclopramide
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB040
LAB066
Reversal / Anti Red
Triarc Syringe Labels - Reversal / Anti Red
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB066
LAB026
Triple Combo
Triarc Syringe Labels - Triple Combo
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB026
LAB034
Glycopyrrolate
Triarc Syringe Labels - Glycopyrrolate
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB034
LAB041
Antiemetic
Triarc Syringe Labels - Antiemetic
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB041
LAB004
Acepromazine mg/ml
Triarc Syringe Labels - Acepromazine mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB004
LAB071
Standard Fentanyl
Triarc Syringe Labels - Standard Fentanyl
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB071
LAB024
Medication added Slim line
Triarc Syringe Labels - Medication added Slim line
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB024
LAB069
Alert Dosage
Triarc Syringe Labels - Alert Dosage
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB069
LAB032
Plastic Modular Dispenser 25mm
Triarc Syringe Labels - Plastic Modular Dispenser 25mm
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB032
LAB035
Naloxone
Triarc Syringe Labels - Naloxone
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB035
LAB045
Tranexamic Acid
Triarc Syringe Labels - Tranexamic Acid
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB045
LAB010
Atropine mg/ml
Triarc Syringe Labels - Atropine mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB010
LAB012
Morphine mg/ml
Triarc Syringe Labels - Morphine mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB012
LAB065
Maropitant
Triarc Syringe Labels - Maropitant
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB065
LAB063
Jumbo KCI
Triarc Syringe Labels - Jumbo KCI
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB063
LAB059
Cytotoxic
Triarc Syringe Labels - Cytotoxic
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB059
LAB042
Calcium Gluconate
Triarc Syringe Labels - Calcium Gluconate
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB042
LAB043
Hep Saline
Triarc Syringe Labels - Hep Saline
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB043
LAB013
Diazepam mg/ml
Triarc Syringe Labels - Diazepam mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB013
LAB047
Plastic Modular Dispenser 45mm
Triarc Syringe Labels - Plastic Modular Dispenser 45mm
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB047
LAB070
Jumbo Midazolam mg/ml
Triarc Syringe Labels - Jumbo Midazolam mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB070
LAB061
Amiodarone mg/ml
Triarc Syringe Labels - Amiodarone mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB061
LAB062
Ondansetron mg/ml
Triarc Syringe Labels - Ondansetron mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB062
LAB036
Flumazenil
Triarc Syringe Labels - Flumazenil
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB036
LAB038
Noradrenaline
Triarc Syringe Labels - Noradrenaline
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB038
LAB039
Esmolol
Triarc Syringe Labels - Esmolol
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB039
LAB044
Frusemide
Triarc Syringe Labels - Frusemide
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB044
LAB053
Arterial Line do not inject
Triarc Syringe Labels - Arterial Line do not inject
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB053
LAB064
Shake the Bottle
Triarc Syringe Labels - Shake the Bottle
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB064
LAB060
Cytotoxic Handle With Care
Triarc Syringe Labels - Cytotoxic Handle With Care
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB060
LAB048
Jumbo Fentanyl
Triarc Syringe Labels - Jumbo Fentanyl
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB048
LAB018
Heparin iu/ml
Triarc Syringe Labels - Heparin iu/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB018
LAB051
Jumbo Dobutamine
Triarc Syringe Labels - Jumbo Dobutamine
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB051
LAB054
Jumbo enteral
Triarc Syringe Labels - Jumbo enteral
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB054
LAB058
Jumbo Ketamine
Triarc Syringe Labels - Jumbo Ketamine
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB058
LAB016
Adrenaline
Triarc Syringe Labels - Adrenaline
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB016
LAB046
Vasopressor
Triarc Syringe Labels - Vasopressor
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB046
LAB049
Jumbo Nor Adrenaline
Triarc Syringe Labels - Jumbo Nor Adrenaline
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB049
LAB050
Jumbo Dopamine
Triarc Syringe Labels - Jumbo Dopamine
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB050
LAB017
Insulin
Triarc Syringe Labels - Insulin
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB017
LAB052
Actrapid Insulin
Triarc Syringe Labels - Actrapid Insulin
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB052
LAB011
Narcotic
Triarc Syringe Labels - Narcotic
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB011
LAB007
Thiopentone mg/ml
Triarc Syringe Labels - Thiopentone mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB007
LAB005
Xylazine mg/ml
Triarc Syringe Labels - Xylazine mg/ml
Pre-printed adhesive syringe labels, useful for identifying syringes with drawn-up drugs or fluid bags with added pharmaceuticals. All labels are slilmline and fit the 15mm modular dispenser- unless otherwise specified (ie. JUMBO).
Refillable Label DispensersTriarc Label Dispensers are the ideal solution for your label storage and dispensing needs. Designed specifically for hospital requirements, these fully enclosed, high quality and modular dispensers are suitable for labels of any size and can be easily cleaned to prevent contamination.
Key FeaturesIncreased dimensions for larger rolls. Designed to accommodate all Slimline and Jumbo labels.Modular width systemDispenser widths start at 15mm and go up in 10mm increments to 35mm which allows you to configure your dispenser bank to accommodate any label width.Dispensing or non-peeling modeSelect from automatically removing label from backing or switch to non-peeling mode if writing is required.Stackable and wall mountableKeep your dispensers tidy through wall mounts or clicking in vertical or horizontally.Fully enclosedPlastic dispensers are fully enclosed enabling cleaning and minimising infection risks.
Please note the previous Label Dispenser units are not compatible in joining together with the new Modular Dispensers (LAB031, LAB032, LAB033).
Product #:
LAB005